Action Type List
Overview
MMS-ActionGlossary-140920-1458.pdf
Each of the 16 messages can be mapped to an action executed on the MC6.
This glossary provides the descriptions for the list of actions.
Bank Jump messages will only execute at the end of the cycle. For example, if you have a Bank Jump message programmed with a Press action, it will only execute when you release the switch.
It is important to pair actions correctly as executing certain actions, like the Long Press, will trigger other actions as well, like a Press action.
Sequence of actions that will be executed | |||||||||
---|---|---|---|---|---|---|---|---|---|
Events | Press | Release | Long Press | Long Press Release | Double Tap | Double Tap Release | Long Double Tap | Long Double Tap Release | Release All |
When switch is | 1 | 2 | 2 | ||||||
When switch is | 1 | 2 | 3 | 3 | |||||
When switch is | 1 | 2 | 2 | ||||||
When switch is | 1 | 2 | 2 |
Press
A single tap to the switch.
A Long Press
action will also execute a Press
action. Hence, if you want to execute 2 different actions with a Press
and Long Press
message, you should use a Release
and Long Press
message instead.
Release
Releasing the switch after a Press action.
Long Press
A single tap to the switch that is held down for at least 600ms.
Take note: Instead of a ‘Press' action for your other messages, you should now use a ‘Release' action instead. This is because 'Press' will be triggered the moment a switch is pressed down regardless of whether it is a short or long press. Using 'Release’ will solve this issue.
Long Press Release
Releasing the switch after a Long Press action.
Double Tap
A double consecutive tap to the switch.
Does not execute a Press action
If a Preset is programmed with a Double Tap
, there will be a slight delay in sending out messages programmed with other actions such as Press
, as the controller needs to determine if a double tap action has been executed.
Double Tap Release
Releasing the switch after a Double Tap action.
Long Double Tap
A double consecutive tap to the switch that is held down for at least 600ms.
Long Double Tap Release
Releasing the switch after a Long Double Tap action.
Release All
This action groups Release and Long Press Release together.
Long Press Scroll
Available from firmware v3.7 onwards
Messages will be repeatedly engaged while the switch is held down.
On First Engage
Executes with
Any action
When the previous selected preset is different from the current one being engaged
When the same preset is engaged again, the Preset Messages with this On First Engage
action will not execute again. When this action is engaged, other messages mapped with actions like Press
will also engage.
Example
If Preset B
is programmed with a On First Engage
message, and the currently selected Preset is Preset A
, if you engage Preset B
, the On First Engage
message in Preset B
will execute, along with the other actions like Press
etc.
On First Engage (send only this)
Executes with
Any action
When the previous selected preset is different from the current one being engaged
Similar to the On First Engage
action, but this action, if executed, will skip any other action like Press
etc. This allows you to execute certain messages in a Preset on first engage first, before executing other messages mapped with actions like Press
in subsequent presses.
On Disengage
Executes with
Any action
When a different preset is selected from the current one being engaged.
Example
If Preset B
is programmed with a On Disengage
message, and the currently selected Preset is Preset B
, if you engage Preset A
, the On Disengage
message in Preset B
will execute.